New Functions of the Eighth Generation Cards
1. High refresh rate, high gray level for constant current driver IC
Grey mode options added, High Refresh Mode refresh rate can be 8-128 times higher than Standard Mode, and grey level reaches 65536.
2. Increasing software brightness correction size
Increasing single receiving card from 96X64, to 320X256, make the brightness correction on big led display Time-effective
3. Supporting PWM driver IC
Supports MBI5030, MBI5042, DM13H, TC62D722 and so on
4. Enhanced utility on receiving card 50-pin output
Each 50-pin output of receiving card has 8 groups of RGB signals. For cabinets applied within 8 groups of RGB signals, receiving card is optimized for better refresh rate and grey level.
5. Receiving card adjustable Start X
One receiving card has 16 groups of RGB signals, and each groups of RGB signal can be set different Start X. This is applied for some special shape led display.
6. Sending card U/D port flexibility for carrying half width or half height
For example, TS801 can max support 1280*1024 with two ports A single network output port supports 1280*512 or 640X1024
7. LED display gradually light-up function
Note: 801D card can be upgraded. Upgrade receiving card 801D adding new functions of point 1,2,3,4,5,7;Upgrade sending card 801D, 802D adding new function of point 6.
8. Supporting 2 to the 10th power colors
The eighth supports 2 to the 10th power colors for each color: 210*210*210=1073741824 kinds of colors. It needs to work with our video processors using the 30 bits TTL. So the coloring number of the eighth is 64 times as much as that of the seventh.
9. The intelligent connecting function
Without resetting the configurations, the receiving cards (including spare ones) of the same LED display/cabinet can be randomly exchanged or replaced, for they will automatically recognize the showing area and content they are responsible for.
10.The intelligent supervision function
In each receiving card, there is a temperature sensor and four fan-power-output-ports. The speed of the fans is under wise controlled according to the warning value of temperature set by users.
11.More scan mode
Supports 1, 2, 3, 4, 5, 6, 7, 8, 9. 10, 11, 12, 13, 14, 15, 16 scan mode/scan duty.
12.Supporting more modules
Supports all the modules with width from 1 pixel to 64 pixels.
13. Cut-up function
Each receiving card max supports 1024 pieces cutup, for non-conventional type display or text display use.
14. Empty pixel insert
It can insert one or more empty pixels every X pixels. This function is applying in non-conversional type display.
15. Hardware pixel by pixel correction
Need to use particular driver chip.
By changing the current for the LED, adjusting the color, wave and brightness of the LED.Make the effect of display pixel by pixel correction better.
16. Supporting pixel supervision function
Need to use particular driver chip.Dynamically check the bad pixels on the display.
17. Giga Technology
Veritable Giga technology. One sending card can support the max pixels: Model801: 1280*1024; model802: 2048*640; two cards are cascaded: 2048*1152.
18. Pixel by Pixel Correction and Unit by Unit Correction Function
Four kinds of correction modes: single pixel, 2*2pixels, 4*4 pixels, 8*8 pixels.
19. Intelligent Identification Function
Can recognize every kind of scanning mode and every type of signal trend of all kinds drive boards,and the accuracy rate is 99%.
20 Gray level 0---Gray Level 66536 (64K) are User adjustable
Users can adjust the gray level from 0 to 66536 levels according to requirement of displays, making the display achieve the most desirable effects.
21. User adjustable Refresh Frequency, Synchronous function
Refresh frequency are adjustable from 10HZ to 4800Hz, and the refresh frequency and phase-lock function can make the display refresh locked at integral multiple of that of computer display, avoiding the image to be torn, and ensuring the image to be perfect. The phase-lock synchronous range is from 47HZ to 76HZ.
22. Double network cables switch automatically
The A and B ports of the receiving card can be both used as input ports or output ports. Users can adapt two computers to control a display at the same time, when one is out of order, the other will replace it automatically; Users can also use one computer with double network cables to control a display, when one is out of order, the other will take place of it automatically, making the display work normally all time.
23. Multi-display synchronous and combination functions.
Supporting one sending card to control multi-display, and the multi-display can be willful combination, synchronous display, and independent play.
24. 256 Levels Automatic Brightness Regulation
The function of 256 levels automatic brightness regulation can make the display brightness regulation more efficient.
25. Audio Transmission Function
Model 802 integrates the audio transmission into the card.
26. Upgrade Program Online
To upgrade the receiving card through LED Studio online, no need to remove the receiving card from the display.
Receiving card has the test function, no sending card needed; can test the display directly, such as bias, gray level, red, green, blue, etc.
28. No Toggle Switch
No toggle switches on the receiving card, all the setups are set through LED Studio.
29. Super Long Transmission Distance
The max transmission distance is 170M (actual measure); normal transmission distance is 140M.The distance can be lengthen to 20Km with optical fiber converter kit.
30. Matching software
Require LED Studio 11.10 or above.